l Support flexible QinQ VLAN,DHCP server/relay and IGMP/ MLD multicast monitoring function;
l Support diagnostic monitoring and remote disabling of fiber optical;
l Support 802.11n Wi-Fi(T/R)function;
l CATV function manageable,support CATV remote shutdown;
l Support NAT and firewall function;
l WAN support networking bridge, route and bridge/route mixed mode;
l Full speed 1G non-blocking switching
l 2048 MAC address table
l Support VLAN, transparent, tag, translation, trunk, etc.
l Integrated port monitoring, port mirroring, port rate limiting, port SLA, etc
l Integrated IEEE802.1p QoS with four level priority queues
l Support IPv4/ IPv6 IGMP snooping and MLD snooping
l Support bridge, route and bridge/route mixed mode
| Technical items | Descriptions |
| Dimension | 185*145*50mm(length*width*highs) |
| Net weight | ≤0.3Kg |
| Fiber port | SC/APC (Single fiber) SC/UPC& SC/APC(Dual fiber ) Downstream rate 1.25Gbps, Upstream rate 1.25Gbps |
| Wavelength | Tx 1310nm, Rx 1490nm, RF1550nm |
| Fiber interface | SC/PC |
| RX sensitivity | <-27dBm (1490nm) |
| WLAN | IEEE802.11b/g/n,300Mbps, a built-in antenna |
| LAN | 1*10/100/1000Mbps+3*10/100Mbp adaptive Ethernet ports, full/half duplex, RJ45 interface |
| Throughput | Throughput can reach 900Mbps or more |
| DC power | 12V 1A, external AC-DC power adapter |
| POTS | 1*FXS, RJ11 connector |
| Button | Reset, power, WIFI |
| Power | ≤10W |
| Operation | Working temperature: -5-+55℃ working humidity:10-90%(non-condensation) |
| Storage | Storage temperature: -30℃-+60℃ storage humidity: 10-90%(non-condensation) |
| CATV Parameters | Optical Receive | -15~+2 dBm |
| 1. | AGC range | -8~+2 dBm |
| 2. | Fiber return loss | >50 dB |
| 3. | wave length | 1100~1600 nm |
| 4. | Connector | SC/APC |
| 5. | C/N | ≥ 50 dB |
| 6. | C/CTB | ≥ 62 dB |
| 7. | C/CSO | ≥ 61 dB |
| 8. | BW | 40~ 1000 MHz |
| 9. | Output level | ≥ 82 dBμV |
